Εκδηλώσεις
Όλα τα Προϊόντα

How to mix silicone B properly

September 15, 2026

1. After each use of drum B: Tighten the original drum lid and wrap the gaps with tape
Fresh film secondary sealing, moisture-proof.
2. extrude machine shutdown: Inspect the sealing ring of the pressure plate; for prolonged shutdowns, thoroughly clean the solidified debris from the pressure plate area.
3. Tools must be strictly separated; the A and B components must not share the same spatula or stirring rod to prevent cross-contamination.
4. Before use, the B component must be stirred unidirectionally.